No-clean tacky flux that can be left on the board for many SMT assemblies. For applications requiring cleaning NC-559-V2-TF can be cleaned using commercially available flux residue removers such as INVENTEC Promoclean and Promosolv cleaning chemistries. Tacky flux should be stored at room temperature (20-25 °C). Syringes and cartridges should be stored vertically with the dispensing tip down.
Properly stored tacky flux has a 12-month shelf life. For optimal performance do not refrigerate or allow 2 hours to normalize. This product is designed for a professional audience.
The information contained herein is based on technical data that we believe to be reliable and is intended for use by persons having relevant skills at their own risk. Consumers of AMTECH products should make their own tests to determine the suitability of each product for their particular process and take safety measures.
Dispensing Kit (Plunger and Tip). AMTECH syringes are intended for industrial dispensing machines and use a piston stopper instead of a plunger - Dispensing Kit is a third party add-on, not supplied by AMTECH. A plunger is to push on the piston and not necessary snuggly fitting AMTECH syringe, a plunger can be loose.
Do not remove the piston as it delivers the best seal preventing contact with air. BEST BEFORE: Exp date Nov 22, 2020.
T° RANGE: up to 300°C. NC-559-V2-TF 10cc (16150) dispensing kit.
NC-559-V2-TF 30cc (16160) dispensing kit. Is the most recent and the most up-to-date no-clean tacky flux formulation by AMTECH. VS-213A-TF boasts ultra-low voiding properties - the lowest among AMTECH no-clean ROL0 family , plus it retains all greatly admired AMTECH context - industrial wetting capabilities, optimal tack/viscosity, long-lasting performance, clear residue and easy cleaning. ROL0, No-clean tacky flux AMTECH NC-559-V2-TF. ROL0, No-clean tacky flux AMTECH NC-560-LF-TF.
ROL0, No-clean tacky flux AMTECH SynTECH-TF. ROM1, No-clean tacky flux (must clean due to M1 activity). AMTECH NWS-4200-6-TF water-soluble tacky flux.
Meet the strongest flux in AMTECH's armoury - ORH1 classification with extra 6% chlorides - used for industrial oxide-free soldering. NWS-4200-6-TF removes oxidation however it is highly corrosive itself - cleaning is paramount.Water-washable flux is in general easy to clean with warm (50°C) Deionized Water (DI) mixed with Isopropyl Alcohol (IPA). AMTECH Sn63/Pb37 (T3) No-clean Solder Paste (SynTECH). 87% Metal, 25-45 microns, 35g syringe. AMTECH Sn63/Pb37 (T4) No-clean Solder Paste (SynTECH-N). 87% Metal, 20-38 microns, 35g syringe (halogen-free, longer stensil life than SynTECH).
AMTECHSn96.5/Ag3.0/Cu0.5 (T4) No-clean Lead-free Solder Paste (SAC305). 86% Metal, 20-38 microns, 35g syringe. AMTECH Sn42/Bi57.6/Ag0.4 (T4) No-clean Lead-free Low-temp Solder Paste. 87% Metal, 20-38 microns, 35g syringe. Popular leaded and lead-free alloys - eutectic Sn63/Pb37 and SAC305 both available for No-clean and Water-washable processes in different diameters.
What makes this wire special is AMTECH flux in its core with proprietary poly(dendrimer) activator which is sufficient to solder to bare copper and hard to solder surfaces without any additional flux. Besides added activity, this solder wire has very little splatter and delivers higher production yields - better ROI.
Sn63/Pb37 Liquidus/Solidus - 183°C (Eutectic). AMTECH NC-61 Sn63/Pb37 2.2% No-clean Rosin core. AMTECH 4300 Sn63/Pb37 2.2% Water-washable Resin core. Sn96.5/Ag3.0/Cu0.5 (SAC305) Liquidus - 219°C / Solidus - 217°C.
AMTECH NC-61 SAC305 2.2% Lead-free No-clean Rosin core. AMTECH 4300 SAC305 3.3% Lead-free Water-washable Resin core.
AMTECH Pre-Saturated Multi-purpose Cleaning Wipes. Chances high the AMTECH flux will be sufficiently cleaned with this residue-free, plastic safe, shed-free cleaning cloth - the AMTECH way!
Pre-saturated in isopropyl alcohol and deionized water (70% Isopropanol #67-63-0 and 30% Deionized Water) providing outstanding cleaning results for AMTECH flux (when there is no need in ultrasonic cleaning), also dust, screens, and gentle glossy surfaces. The item "AMTECH NC-559-V2-TF No-clean Tacky Solder Flux (ROL0) 75g Jar USA MPN 16144" is in sale since Wednesday, July 11, 2018. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering/Desoldering Equipment & Accessories\Solder & Soldering Consumables\Soldering Flux".The seller is "optimalbay" and is located in Kissimmee, Florida. This item can be shipped worldwide.